Do you want to install a bidet spray and don’t know the process? Worry not; this is the right place for you. The bidet shower, or shattaf, is a practical and hygienic addition to any bathroom. Installing a hand-held bidet spray is a relatively simple and cost-effective way to enhance personal hygiene and reduce toilet paper usage. In this comprehensive guide, we’ll provide a detailed step-by-step approach to installing a hand-held bidet spray, ensuring a smooth and successful installation process.
Bidet Spray Installation Singapore
It’s a manageable yet tricky project to install a bidet spray using the DIY approach. If your installation path is enlightened by some strategic steps explained by LS Plumber Singapore, you are on the right track. The first and foremost instruction is to get the right hand-held bidet spray for the toilet. This bidet spray should be suitable for your bathroom requirements.
Step 1: Gather the Necessary Tools and Materials
Before starting the installation, gather the following tools and materials:
- Hand-held bidet spray kit (including the spray head, hose, holder, and mounting hardware)
- Adjustable wrench or pliers
- Teflon tape (optional)
- Towel or rag
- Safety goggles (optional for eye protection during drilling)
Step 2: Shut Off the Water Supply
Locate the shut-off valve behind your toilet and turn it clockwise to shut off the water supply. Flush the toilet to drain any remaining water from the tank and bowl.
Step 3: Prepare the Toilet Seat
If your hand-held bidet spray kit includes a holder that attaches to the toilet seat, you’ll need to prepare the seat for installation. Place the holder in the desired position on the toilet seat, ensuring it is aligned and centered.
Step 4: Mark the Mounting Holes
Using a pencil or marker, carefully mark the mounting holes’ positions on the toilet seat or wall, depending on your chosen installation method. Make sure the holes are evenly spaced and aligned with the holder or mounting bracket.
Step 5: Drill Pilot Holes (If Necessary)
For surfaces like tiles or concrete where drilling is required, use a drill with a suitable masonry bit to create pilot holes at the marked positions. Drill straight to avoid damaging the surface.
Step 6: Attach the Holder or Mounting Bracket
Secure the holder or mounting bracket to the toilet seat or wall using the provided screws and a screwdriver. If necessary, use wall anchors for added stability, especially when mounting on drywall.
Step 7: Connect the Hose/Completely Install Bidet Spray
Now, connect one end of the bidet spray hose to the spray head and the other end to the water supply valve located near the toilet tank. Use an adjustable wrench or pliers to tighten the connections securely, ensuring there are no leaks.
Step 8: Check for Leaks
Turn on the water supply valve and check for leaks at the hose connections. If you notice any, tighten the connections further or apply Teflon tape to the threaded ends to create a watertight seal.
Step 9: Test the Bidet Spray
When you install a bidet spray, test it by pressing the trigger or lever on the spray head. Adjust the water pressure to your preference and ensure that the spray reaches the desired areas for effective cleaning.
Step 10: Adjust and Secure the Holder (If Needed)
If the holder or mounting bracket allows for adjustment, position it at the optimal angle for easy access and use. Tighten any screws or knobs to secure the holder in place securely.
Step 11: Clean Up and Final Check
Wipe down the area around the bidet and spray with a towel or rag to remove any water or debris. Check all connections and fittings one last time to ensure everything is secure and functioning correctly.
Step 12: Enjoy Your Hand-Held Bidet Spray
Congratulations! You’ve successfully installed a hand-held bidet spray in your bathroom. Enjoy the convenience, hygiene, and eco-friendly benefits of using a bidet spray for personal cleansing after using the toilet. Say goodbye to traditional wiping methods and embrace a more hygienic and sustainable approach to personal cleansing.
Conclusion
It is a straightforward and rewarding DIY project to install a hand-held bidet spray that enhances bathroom hygiene and reduces reliance on toilet paper. By following this detailed step-by-step guide and using the right tools and materials, you can complete the installation process efficiently and enjoy the benefits of a convenient and eco-friendly bidet spray in your home. Say goodbye to traditional wiping methods and embrace a more hygienic and sustainable approach to personal cleansing.