Are your copper pipes damaged? It causes water waste, mold growth, and also hefty repairs if not repaired on time. So, how to repair a copper pipe in Singapore? By fixing the damaged copper pipe, you can save on expensive repairs, stop the water from wasting, and also the mold growth that could cause health issues and more damage to the pipe.
Read this post where we’ll teach you step by step how you can repair a copper pipe in Singapore all by yourself. You won’t need any professional help until you really want to take it. LS Plumber Singapore also offers sink pipe repair, exposed copper pipe, and shower taps installation services in Singapore.
Why Repair A Copper Pipe In Singapore?
Fixing a copper pipe in Singapore is important because it:
- Stops water from leaking and damaging floors or walls
- Helps avoid sudden bursts that can flood the home
- Keeps water bills from going higher than they should
- Prevents mold from growing in damp spots
- Keeps the plumbing running without pressure issues
- Makes the pipe last longer before it needs replacing
- Saves money on bigger repairs later
How to Repair a Copper Pipe in Singapore
Repairing a copper pipe in Singapore can keep you away from expensive repairs, mold growth, and also more damage to the pipe over time. This is how to repair a copper pipe in Singapore step by step.
Damage From External Impact
It doesn’t take much to damage a copper pipe if it’s in an exposed spot. A heavy object falls, a tool knocks against it, or renovation work gets too close, and the dent is done. The pipe might not leak right away, but the weakened spot can split later without warning.
How to Repair?
- Switch off the water supply.
- Remove the damaged part using a pipe cutter.
- Replace it with a matching copper section and secure it with couplings.
Wear Near Fittings And Bends
Pipes don’t always run straight. Wherever there’s a bend or fitting, water changes direction, and that movement causes more wear on the inside.
Over the years, the constant flow starts eroding the metal until it thins out and leaks. It often happens quietly, so it’s found only during routine checks or after spotting damp spots nearby.
How to Repair?
- Mark the worn-out section and cut it away.
- Insert a fresh piece of copper pipe.
- Seal the connection with proper soldering.
Temporary Emergency Repair
Sometimes a leak doesn’t wait for the perfect moment. A burst pipe at night or during the weekend needs a quick fix to avoid flooding. The goal here is to stop the water until a proper replacement can be done.
How to Repair?
- Close the main water valve immediately.
- Dry the leaking spot thoroughly.
- Wrap waterproof pipe repair tape tightly around it until a plumber can replace the section.
Leaks From Corrosion
Copper might look tough, but it’s not untouchable. In Singapore’s warm, damp air, the metal reacts with moisture over the years.Â
What starts as a faint green stain can turn into a wet patch. Before long, water slips out through a tiny hole. The leak is usually slow at first, but it won’t stay that way for long if nothing’s done.
How to Repair?
- Turn the main water supply off.
- Wipe the pipe dry and sand the damaged area clean.
- Press epoxy putty firmly over the hole and leave it to harden before turning the water back on.
Joint Failures
The connections where copper pipes meet aren’t permanent forever. Solder can crack, and fittings can loosen after years of constant water flow and shifting temperatures.
A small ring of dampness around the joint is usually the first sign. If left alone, it turns into steady drips and sometimes a thin stream running along the pipe.
How to Repair?
- Shut off the water supply and drain the pipe.
- Heat the joint until the old solder softens.
- Clean, apply new flux, and solder the joint tightly.
Cracks From High Water Pressure
Too much pressure in the system slowly wears down the pipe from the inside. It’s like the copper is under constant stress.Â
One day a hairline crack appears, and that’s all it takes for water to spray out when the tap runs. These cracks tend to hide until there’s enough water behind them to force the leak open.
How to Repair?
- Cut away the section with the crack.
- Fit a new copper piece in its place.
- Secure the replacement using solder or compression fittings.
Final Words
A damaged copper pipe can cause a lot of inconvenience. More than that, it also causes water wastage, mold growth, and more damage to the pipe if you don’t fix it timely. You may even need to buy a new one if you don’t fix it timely.Â
So, how to repair a copper pipe in Singapore? These are the steps: Shut off the main water supply and drain the pipe completely. Cut out the damaged section with a pipe cutter and measure and prepare a matching copper piece. Clean the ends and apply flux, then connect the new piece securely. Heat and solder the joint, and let it cool before turning the water back on.