install a shower

How to Install a Shower for Your Bathroom in Singapore

Install a shower in your bathroom and improve your private experience while raising the market value of your home. In Singapore, where land space is scarce, a well-installed shower is functional and reviving. For the layman, below is a step-by-step comprehensive guide on how to install a shower in your bathroom. It does not matter if you are an experienced do-it-yourself man or a primary young man; these procedures will assist you to complete the task effectively.

How to Install a Shower for Your Bathroom?

Installing a shower is a manageable DIY task with the right tools and guidance. This section explains a step-by-step plan for shower installation in Singapore. LS Plumber Singapore provides shower tap installation, shower leak repair, and tap leak repair services, and this straightforward process explains how to install a shower in your bathroom. 

Step 1: Planning and Preparation

Of course, it would be great to begin immediately, but first, we need to organize and get ready. Select the appropriate shower: electric, mixer, or thermostatic, based on the expenses and requirements. Check how you intend to fit it, and then compare the shower’s sizes with the available space in the bathroom. 

Below is a protocol for the installation process and other valuable items required to complete the project, such as a drill, two screwdrivers, a pipe cutter, a spirit level, and a shower kit. In particular, the main water supply must be shut off to prevent water wastage and hinder the process. 

Step 2: Install the Shower Valve

It concerns the facet by which the water is regulated or directed during showering. Start by making a cross on the spot that will be used to fix the shower valve. Aim to get the best height that anyone can easily access. It is best to drill at the abovementioned positions, avoiding existing pipes and wiring as much as possible. 

Screw in the valve to the wall, make sure it is level by using a spirit level on the valve. The hot and cold water pipes should be connected to the shower valve; cut the pipes to the appropriate length if necessary. Tight all joints to eliminate any leakage.

shower installation

Step 3: Install the Showerhead and Arm

The showerhead and arm are where the water comes out. Mark the position of the showerhead, making sure it’s high enough for tall users but not too high to cause splashing. Drill holes for the shower arm bracket at the marked position. 

Attach the shower arm to the wall using the screws provided, ensuring it is secure and straight. Finally, screw the showerhead onto the shower arm, hand-tightening it to avoid damaging the threads.

Step 4: Install the Shower Tray

The shower tray has a trapping and draining facility to manage water capturing. Place it in the appropriate installation area to the tray and level it using a spirit level. If required, mark and drill holes on the tray for the feet. 

Fix the tray to the floor with the screws or adhesive that came with the packaging; ensure it does not wobble. Join the shower tray drain and the other pipes in the layout, providing all the joints are well-fitted to avoid leakage.

Step 5: Seal and Finish

Sealing and finishing touches give you a waterproof and eye-pleasuring shower. Waterproof silicone sealant should also be applied to the edges of the shower tray and around the shower valve and arm. This will keep water from penetrating through the walls and the floor of the house.

If a shower screen or curtain is being used, installation has to be done according to guidelines to ensure no water splashes out of the shower area. Remember to wipe off any sealant deposit and ensure clean the correspondent area. Ensure that there is no leakage, and if there is, ensure that corrective measures are taken.

install a shower for bathroom

Step 6: Test the Shower

Afterward, you must turn on the shower to ensure all the installations have been adequately done. Switch on the main water supply and inspect for a difference in water flow around the valve and shower, leakages in the shower head, and water leakages in the tray. 

Adjust the position of the shower head and turn on the water to see that the flow and water temperature are in the desired set-up. Inspect all the joints and the gaskets for leakage and apply some additional tape or tighten them if necessary.

Conclusion

It is a rewarding DIY project to install a shower in your bathroom to maximize the available space. The installation process is simple and effective while having the right tools with you. However, enlist professional help when required.

Frequently Asked Questions

Yes, you can add a shower to the bathroom, but it requires additional plumbing work, so it must be appropriately planned.
With the right tools and a proper understanding of the process, you can install a shower in your bathroom through a DIY approach.
Explore the market and target simple and cost-effective materials for your bathroom shower. This will allow you to control the price of a shower.
Scroll to Top